Sorry brother been away from the forum so I haven't posted anything.
I have nothing for you now but will look for my manual at home but I'm
still laughing at the stones comment from Cruiser. I'm running .42kg's up front right now since I'm at 13.5 stones give or take a pebble with no gear and need to check on the rear when I get home as well. Like Cruiser stated that rear sounds a little tight on the spring and if it's rebounding too quick would give you that bucking bronco feel when corning. As a quick test slow your rebound down almost too much and see if there is any change in the handle.
You need that rear dailed in before you want to touch the front. I beleive in my manual it states to start with the 8 - 10 mm on preload and adjust from there but if you are far off from that it couldn't be a bad starting point.
Good Luck, I will take a look tonight.
|