I just did this to my 300 and must say,very easy to do by yourself,remove kickstarter,pull off your pipe,brake pedal,skidplate,drain your oil and coolant,take off your clutch cover and waterpump being careful not to damage the gaskets or buy new ones,remove the right side engine cover,remove the clutch pressure plate springs and cover,then pull out your clutch plates and leave them in order,then you need a big metric socket with an airgun is easiest to remove the basket or get a tool that holds the basket to remove it,then you need to remove the heavy outer spring on the plastic collar and remove the collar,the gear comes right out after that,most likely you will need three parts,the inner spring,small gear and kicker gear,and any gaskets you need to replace,I can look up the number for the parts,but gofasters knew exactly what parts I needed,I should have taken a few pics,when I do my 200 in a week or so I will take a few photos
|