As posted on another thread.
The factory guys told me to leave the preload alone. What they told me is to remove the bottom shim stack from each fork. Take the nut off and remove ONE of the three large shims from the stack. Keep the shim handy because you might want to put it back in once the forks have broken in. They claim it takes 20 to 30 hours before the forks fully break in (Sacks). Also you need to take out the top space an mill 4mm off of it and mill a little out of the shoulder of the cap. This gets the fork to settle down into its stroke alitte bit. To turn the preload adjuster (if you must) Just find a nut that is the correct size. I would contact Mark at GoFasters. They should have a video of all of this.
Brian
|