I recently cut my bars down and ran out of room for my kill switch.
That's when I saw the Rideng billet kill switch.
I thought, great idea!
The switch takes the place of the brake master cylinder clamp.
The switch is well made.
I switched to the allen bolts because a socket won't fit on the hex bolts.
The only down side is, the switch comes with only 4" of wire. So I had to add wire to reach the OEM connectors.
The switch cost $41 from BTOSports.
http://www.ride-engineering.com/prod...pn=MX-KS00B-AS
