Quote:
Update,
After a closer check it turned out that with the 8X16X1.5 mm washer,
the PV vas binding half way in its travel.
There was NO way i could make my PV work properly with the washer in place. It felt realy good with some play in the closed position, but it would bind half way.
My conclusion is that the washer is machined in to the PV, it certanly looks that way, and the parts list needs an update.
|
My 08 EC300 also had slop - a washer was placed between the bearings - and no binding happening (told the guy that did it about #39 missing - he didn't notice, but thought it needed shimming, so did the above)