Yesterday we were on the sand track,after them I tested the reboundscrew again.
No variation (open/close) when I push the fork and release.
Is this normal that the L/S rebound is so soft.
When I rode on the track it feels good
May be the H/S rebaound is better?
actual stack Marzocchi 2006
22 x 0,1
21 x 0,1
19 x 0,1
19 x 0,1
17 x 0,1
17 x 0,1
15 x 0,1
I use Motul expert Oil 5W /10W mixed 1:1 (26,9 reported cst@40C° [centistokes])
air 125mm a little bit to much
preload 5mm
4,5 N/mm springs
MV
15 x 0,3
15 x 0,3
22 x 0,3
11 x 0,2
Do this MV (bleed shim) also affect the rebound
__________________
Husqvarna TE 300
|