Quote:
Originally Posted by swazi_matt
a bit of a hijack, but i was also looking at the larger volume PV cover and a bit surprised at the cost. Firstly does it make a huge difference, and are the actual dimensions critical, was thinking of getting a machinist here to make a spacer piece about 5mm thick that would go between the engine and the original pv cover, should work out a lot cheaper ... any thoughts welcome
|
I made a spacer 10mm thick for my 250. It seemed to make no difference, in fact I thought the engine was stalling more easily, so I took it off again. That said, it looks like the proper cover is much deeper - maybe 25mm. This could be the difference.