Jakobi,
IF you ever get the chance, try a neat combo I did the other day in my 300... I had a:
40 pilot
BGL clip 5
180 main
air screw out 2 turns.
whoa!
What a smoooooooth set up. The taper starts a bit sooner on the B needle however it is leaner past 1/2 throttle than the N1ex taper.
I like it, the bike won't load up and is really smooth getting on the pipe. It just barks in the sunny mode too. I will try clip 4 and re evaluate. My temps were upper 70's, very humid at sea level.
I'm still playing a bit, I was at CCK-3 which was good all around. I'm always tinkering..
__________________
'10 EC300 -- very happy 
|