Also I wouldnt use a stone hone on these cylinders,, can take too much too fast. Well I do use one but different,, I wrap my three stone hone in a large scotchbrite pad that I soak in wd40 and very lightly use that. gives a perfect pattern and cuts the glaze out without doing any "damage". If your not used to honing plated cylinders on a weekly basis its easy to screw them up,, this is a good safe way to do it for the GG owner,, who does this less as GG bikes require top ends less often than jap bikes..
__________________
Steve
16 Beta 350rr
04 KTM 525 sx/exc gone
03 KTM 625 sxc-rehab unit-did its job and now gone
03 GG 250 ec-gone
97 GG 250 ec Gone
|