Agree with kegs.. If it works you've saved 10 minutes and $10.. If it doesn't at minimum you're putting in the time to tear it right back down again, then the cost of gaskets, and this is assuming nothing bad happens as a result..
While on the topic though.. Whats everyones opinions in regards to installing gaskets? Touch of grease on the faces? Dry?? Gasket sealant??
I'll be looking at a stack of approx 1.3mm 2 x 0.5mm and 1 x 0.3mm.. My logic tells me to put the thin one between the 2 thicker ones.. whats everyone elses thoughts?
|