Quote:
Originally Posted by stainlesscycle
how are you setting preload on the sachs - since it's already preloaded a few mm just to get the spring on? just set approx 10mm preload from fully out?
|
If you use a spring off a Husky Sachs they are a little shorter. I used a GasGas Sachs spring on my Husky and it had a little preload backed off all the way like you mentioned. I started at 10mm and ended up backing it off about 2mm. I just rode the bike and adjusted it little by little until I liked it.
BTW I was using a 5.6 spring.