I'm ready to run whatever springs you suggest Dave
I agree with the other responses so far too. Check that the forks aren't binding. Have you over torqued the triple clamps? still running 3 bolts in the lower or 2? Where are the forks in the triple clamps?
For the front end not tracking check sag and preload both end.
I've also found that if the rebound is too fast the bike dips in as you enter the corner and then the rebound pushes back out too fast causing the bike to stand up. Softening or fastening the compression only compounds this action making it worse. More dip in and a faster rebound. If the bike can stay up in its stroke for most of its work, you only need as much rebound as required to get it back to where it needs to be.