This is what I did:
Unscrew the top nut.
Drain the oil from the outer leg.
Remove the bottom nut.
Remove the inner leg from the outer leg.
Open inner chamber, remove the compression plug and drain out the oil.
I cleaned everything with "quickclean".
Then I did this:
Filled in the new oil, put back the compression plug and verified that it ran out some oil out of the holes in the black part.
Is there any space that can expand in the inner chamber? So that you can have different amounts of oil?
Seems strange, I felt that the amount of oil that did not place in the inner chamber was squeezed out when I turned back the compression plunger.
|