Quote:
Originally Posted by theexception_03
Thanks for all the info, the needle clip was actually in postion 1 at the top. not postion 5 like I said (sorry)
Float is spot on at 16mm
|
In my 300 I personally found the same with the stock needles. Really rich off the bottom and would rip up top. Would load up and smoke like a chimney if I wasn't hard on the throttle all the time. Ie 2 minutes of ST and it was chuggin. I needed the idle screw right in to make it idle and even then it only just did at full temp.
I'd suggest grabbing a handful of jets and a couple needles and playing to see what works best. My suggestions for starting are a NEDW and a N3EW. 40-45 pilots. 172-180 mains. I've purchased through
http://www.powersportsplus.com/ before and although it often takes a week or two for them to arrive and some needles are on back order, its just as quick as trying to get them locally and a fair bit cheaper.