Thread: Factory Needle/Jet Setting EC250
View Single Post
  #62  
Old 06-28-2012, 05:13 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
  
Join Date: Oct 2010
Location: Australia
Posts: 7,992
Default
Quote:
Originally Posted by theexception_03 View Post
The idle screw is only about 1 turn out, so yes its in alot.
You want the Idle screw out as far as possible (slide not raised much) and the Air screw to be between 1 turn out and 2.5 turns.
Reply With Quote