The Pampera splines DO fit, its the bend thats all wrong. Question is when it is reshaped to fit the EC will it be long enough?
I have an IMS steel shifter on my 10 yr olds KLX110. That kid crashes the hell out of that bike! Has bent everything on it. If he bends the shifter I just grab it and bend it back, and the tip pivot is as tight as new. I was thinking of taking an old GG shifter and machining off the clamp area into a nice square section, to form an adapter. Then weld a steel box section to an IMS shifter of the appropriate bend, with a bolt through everything to clamp it tight. Make up a spare if it works, and the adapter part should never break.
|