Quote:
Originally Posted by Doc Brown
Nah Hannes, it's not necessary to measure the squish at this moment. It's a carb problem not an engine problem. I need to get out 10km per liter at least. Currently the engine uses about 1,3 liters per 10km.
It's easy to reduce the fuel consumption I was just wondering why all 4 other 300's I jetted the very same way used around 1 liter per 10km but the only one that drinks is mine.
I'll simply try a needle that's a half clip leaner and/or reduce the pilot jet from 42 to 40. I will get this right in less than an hour but the real problem is: I can't ride at the mo...
Thanks for your help, much appreciated!
|
It's an engine problem.. not a carb problem.
Same carbs, same jetting specs..
Inefficient engine for sure!