Quote:
Originally Posted by farmerj
I think the options for that issue are:
(1) Try to buy a new Rieju bendix cover (with the bearings) as in the picture above.
(2) Purchase the cover with bearings offered on Ebay as mentioned earlier in this thread.
(3) Wait for gg3 to perfect his mod (install bushings in existing areas and machine Bendix & Pinion shafts to fit).
One other idea, which I intend to post on more fully at some point, is to go with a 24V starting system. The extra power from doing this overcomes deficiencies in the gear drive system. My dealer has done 3 bikes like this. His battery solution is the "new news" as far as I am concerned - Antigravity makes a "small case" battery, and two of them will fit in the original GG battery compartment, stacked on one another. Wire up the second battery between starter solenoid and starter, and good to go!
https://antigravitybatteries.com/pro...l-case/ag-401/
Did your starter work before you replaced gears/bearings/AS3 cover? |
Just found this video from 2015 when trying to understand your idea of doubling voltage. Look correct?
https://thumpertalk.com/forums/topic...ting-for-gncc/