View Single Post
  #348  
Old 03-30-2024, 09:53 AM
ec-txtr ec-txtr is offline
Member
 
Join Date: Jan 2020
Posts: 10
Default 2011 EC250 Six Day

PWK38 ASII (2 bolt cap)
Main jet: 175
Pilot jet: 40
Needle: JD Jetting Red
Clip position: 4 (almost richest)
Slide: #7
airscrew: 2 turns out from seated but doesn't really matter
Mix: 50:1 Klotz TC2
Altitude: <1000ft
FMF
7mm float height

I have had this bike for abut 5 years and it has always run well. Crisp and strong with very little spooge. It has the typical idle where it seems normal but then almost dies after about 15 sec. I have always used a 50/50 mix of 110 Turbo Blue and Shell 93 but started using straight pump gas last year and the jet block gasket failed and now its hard to get it back to where it was even with a new jet block gasket. Posting here before I try different slides and needles and will update if I improve things.
Reply With Quote