Thread: Jetting Change
View Single Post
  #6  
Old 04-11-2010, 05:45 PM
f14rio f14rio is offline
Member
 
Join Date: Mar 2010
Posts: 8
Default

Quote:
Originally Posted by stainlesscycle View Post
is that a fresh plug? color doesn't look bad , but the ground strap looks beat up. is the electrode still square - or are the edges rounding?

Yep fresh plug with about 30 minutes of time on it. Electrode is still square.

Funny thing is ... 24 hours later and 2 minutes into riding the plug fouls. Also... plenty of oil dripping from the exit of the silencer and runs the down the length of the pipe.

I am running 42:1 whereas the previous owner ran it at 32:1 without problems until recently.

I don't think I mentioned this earlier but it is a 125cc. Main jet is a 180 (manual says standard is 185). Got the clip on the needle on the 2nd notch from the top.

Any suggestions?
Reply With Quote