Thread: Zerex Dex-cool
View Single Post
  #5  
Old 02-22-2007, 04:45 PM
Eric K Eric K is offline
Senior Member
 
Join Date: Jul 2006
Posts: 546
Default

I use the Evans coolant. It works very well, with no boil over issues even under the most demanding conditions. A few key things with the Evans coolant...

1) get all of the water out of the system before you use it.
2) allow room for expansion - do not fill the cooling system too high

I back the radiator cap off a bit to run at a lower system pressure.

Regarding DEX cool or any other coolant, NEVER mix different colored coolants in even small quantities as some of the combinations are very corrosive to aluminum.
__________________
Eric K
'06 GasGas EC300
'01 GasGas XC300
Reply With Quote