2013 XC250 front number plate
Completed my install. Used the 2009 CRF 450 front plate. Had to trim off the inner lower part of the Honda plate to get a good fit at the fender. Drilled two new holes to line up with the GG fender pins. Made the bracket with aluminium flat stock. Had to relocate the two brake hose guides slightly lower by drilling new holes in the guide clamps just above existing holes. Used the top triple clamp throttle cable guide mount hole for the bracket mount.Was able to keep the throttle cable guide.With the brake hose running in its stock guides behind the plate it makes for a very clean look.
__________________
Steve
2013 GG 250 XC Racing
2010 KTM XC 150
2009 Husky WR 144
|