Quote:
Originally Posted by Jakobi
How does the bike run now? What are you looking to change.
First impressions looking at what you're running is.. Way small on the pilot.. Way rich on the needle.. I can't judge the main, but looks small for a 250 too.
I see you are at altitude which would mean you'd typically want to lean things out across the board, however the needle and clip you are running are really rich. Much richer than the stock needle (which many people at slight elevation find too rich).
At a guess I'd say your bike probably runs like a real pig from 1/8th - 1/4 throttle before things start to clear out into the top end. Really pulling well from 1/2 to WOT. I think the small pilot is a band aid to try and help clean up the rich taper and clip pos of the needle.
|
The bike runs more like a goat almost pig like. Good guess!!! from 1/8 -1/4 throttle. Pretty good after that. So the bike came with a bag of jets and a needle. The needle is a CHN where does that fall? The plug dosent look to bad a little wet. Also running 50 to 1 With Motule syn oil I think it is the 800. I think the carb is a 38mm that is what is supposed to be from the factory. How do you tell?