Quote:
Originally Posted by memphis2857
I?ve tried PHDS, Twisted Eng, Flexx Bars, and now Mako 360. I will never ride without a Mako again. It puts all the other dampening systems to shame. You get full 360° dampening, lots of tuning options, MEGA vibration reduction, you can run ANY bar bend and ANY brand of bars you choose, and Lance and Lisa are fantastic people with excellent customer service.
Sent from my iPhone using Tapatalk
|
YES, to all the above.
Superb product with great improvement to cost ratio.
The only caveat being that you can't use the Mako as stock in the most forward position of the triple clamp with the mounts turned to put the the bars furthest forward because of interference with the top cap of the fork.
I spoke to Lance about this a couple weeks ago and he's aware. The lower mounts are a shared part to many machines and so few riders set their bikes up with the bars in that position it's rarely an issue that's ran into.
IF you need to set your bars up like that because you're 6' 7" tall or you're a recovering trials rider and don't want to lower your forks all the way in the clamps you could machine (or file or belt sand) 3-5mm off the outer edge of the mount and they'd clear.