Quote:
Originally Posted by Ignas
Just as i got the bike i tried .45 and 5.4 front was like rock hard and rear was ok but 5.2 was better
My static and race sag is fine with 5.2
Problem is that front suspension is working oppositely, i only use 1/3 - 2/3 of travel. I have wp mxma4800 forks and have read that most of the guys puts .4 if used in two stroke.
Also racetech suggests 0.416 and 5.32 for my weight.
I remember changing rear spring to one step harder than oem on my xr650r ant that was terrible idea. It made fast compression even worse and i had to go back to oem spring.
|
Strange I am bottoming out my forks with .42 pretty bad. Just sitting on the bike they drop mm ore than an inch. But I have zooks not WPA.