She only has 60hrs on it, with rings done at 25hrs. Doesn't appear to be any blow by peeking in the exhaust port.
Cosmetically she's horrible. Plastics faded, frame has some suface rust. Pipe is coated in rust. Have some play in the swingarm up and down, and not sure if it's upper shock or just slop in the linkage and swingarm pivot. Trying to keep costs down, but not sure where to compromise. The bikes aren't worth a lot here as used items, and never were pricey new either. It doesn't make financial sense to invest heavily on it.
On the other hand, if I can keep prices down it'll be a fun little bike!
Estimates so far show I should be OK to stick to budget, but need to either leave the top end for a bit, polish the old pipe, or just service the linkages instead of replacing. Either option should save between 150-350 aud.
|