Quote:
Originally Posted by Dougie Dangerous
Removed cover plug from power valve adjuster and found this....
Attachment 8673
Attachment 8674
Attachment 8675
Attachment 8676
Looks all wrong to me , not like pictures in manual or u tube. Whole assembly seems to be sticking too far out and you can see a large clip at the rear of the shaft which I cant see in any pictures ....
.....any ideas what has gone wrong.... HELP! |
As others have said you are missing the bearing, it seems that the inner race of the bearing is still on the shaft, if i was i your position i would take the right cover out and check if it is on the bottom of the case.