[SingleTrackMind]

Thanks for all your suggestions guys. After I pulled the carb the throttle cable appeared to be seated. I messed with it a little, pulled the bowl, shot some carb cleaner through the jets, etc. When I reassembled it I paid special attention to the carb cable and I'm about 99% certain that the metal tube with the angle wasn't seated all the way because it took a bit to get it seated. Complete newbie move on my part. Thanks again for taking the time to comment.

Had a great day of riding. Bike is running well except the bottom end seems almost non existent. I do have a crushed pipe from a failed log crossing attempt so I'm going to start there before I start messing with my jetting / clip settings.

Thanks again guys.