Quote:
Originally Posted by Ponyboy
No, like an fool I didn't. It was snowing outside and I was in a hurry to finish putting it all back together so I could go rip in the snow.
I used the same thickness base gasket at what was originally on the bike when the the PO had the squish mod done. So I figured "it would be the same" now I regret not measuring.
|
That should be ok, then. I do the same. I machined the head for a .3mm base gasket, and have used the same thickness since, without further measuring.
__________________
Anders
"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)
2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
|