This is your rebound stack..
Nut
11 x 2.5 spacer
11 x .10
11 x .30
14 x .15
17 x .10
20 x .10 (3)
12 x .10
piston
You more damping.. I'd take that 12 x .1 off the piston face.. All it does it let a load of oil bleed on past the stack. I'd slip it in around between or under the 20's.. as I did on mine (see below).
This is what I have in my set..
Piston
20x.10 (2)
12x.10 - bleed moved down to crossover
20x.10
18x.10
16x.10
14x.10
12x.10 - from BV
11x 2.5 - collar
|