Its only one variable in the setup, but I'd go with what the tuner recommends.
I'm 75kgs plus gear (easily add 15kg+).
2010 chassis on Ohlins TTX both ends ran .45kg/mm and 5.4 to 5.6kg/mm depending on preload and purpose.
2013 I'm running .45kg/mm (1x.46kg/mm and 1x.44kg/mm), 22Nm ICS on KYB SSS and a Cannon RC 5.4kg/mm rear spring.
I'm probably a touch over sprung but love the bottoming resistance I get through it, while less preload allows it to be a little softer initially. Can be a bit firm when hitting things already part way through the stroke, but I really like a firm sharp setup that gives some feedback and doesn't wallow or mush when you're getting into it.
|