Still looking into info regarding axles. Have a mate measuring up a 2013 CRF450R with 2012 YZ250F forks for me after the weekend. I also need to confirm that he used the Honda axle and wheel spacers. I know he went to an oversized disk with carrier, while I plan to use the stock Gas Gas disc (and will require a YZ250F 260mm carrier).
Center line of fork to center line of fork on both our bikes is 190mm.
I'll need to source some smaller ID wheel bearings in order to run on the 20mm axle. Measuring up spacers to center the wheel will be an easy task, but if I can get away with finding an OEM setup that slips on it'll be even easier.
