[mmarco78]

Hi all, I am rewiring my 2010 EC 300 with a simplified wiring, and I am all good regarding lights, regulator etc.
However, the previous wiring was one huge mess, and now I am left with three loose wires coming from the CDI, as per attached picture:

White/blue
Black/yellow
Black/white striped

As per the wiring diagram I have:

white/blue should go to the pin of the spark plug coil
black/yellow should go to the ground switch (engine stop)
black/white seems to go to the multifunction instrument, probably as a rev meter, so I can just blank it off/tape it, as i do not use any dashboard as per now.

Can you please confirm?
Thank you all in advance for helping out!