Any more info on NExx needles?
On my 2006 300 with AS1 I was running an N3CH, top clip with 42/178 jets and it ran pretty good, but still loaded up slightly at low rpm, which made going from woods to hill climb quite difficult. So I thought I'd try an NECH needle, as they are leaner down low. Now I've run it at top clip 178 main and it's lost a little mid range, so I tried 2nd clip, suddenly rich as hell, so I've dropped to a 168 main, the low and and mid range is there, but at 3/4 throttle it's still a bit rich.
I can't find any information on the actual dimensions of this needle, but I'd like to know where I should be going from here. I'm a bit scared of dropping the main jet any more, are there any NExx needles out there that are just a bit leaner on the final taper area?
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear
2016 RM-Z450
|