Quote:
Originally Posted by Halcon
Update_ Got a NEDW needle and that has really helped things out. I am now running the NEDW needle on the second clip, 168 main and 40 pilot, air screw at 2.5 turns out. I suspect that I am still a bit rich on the pilot as it starts from cold without the choke. Think I may try a 38 pilot to clean up the last little burble. I'm at 3500' and temp was about 12 C during testing. My riding area is higher and its finally getting warmer in the frozen North so a bit leaner should help. If anyone has any suggestions I'm happy to hear them, thanks,
|
Did you back off the idle and reset your air screw when you swapped to the new needle? if you didn't reset these after swapping needles it will be "off" - you will still be "pulling over"... Where is your idle screw at now - is it still nearly "coil bound" (all the way in)?
It might also help to know which slide your bike has...
jeff