View Single Post
  #51  
Old 10-15-2018, 11:05 PM
Gibnut Gibnut is offline
Member
 
Join Date: Jan 2018
Posts: 73
Default

Quote:
Originally Posted by Jakobi View Post
Bugger me..

Combustion chamber cc's at 21.5cc
250cc piston dome has always been around 6.6cc
Volume of 1mm squish clearance is 3.46cc

Total trapped Volume 21.5 - 6.6 + 3.46 = 18.36
Compression Ratio (18.36 + 249)/18.36 = 14.56

Bit high I think..

If.. it was cut to 1.25mm as requested the ratio would down to 13.93:1 ...which is where my old 2010 was set. Last bike was 13.2:1

So so so.. Where to from here.
Mine went down to TSP twice as well.

Also, after you rip the 5mm thick gasket, check the retainer nut on the PV actuator rod thingy - mine had backed out all the way down the thread.
__________________
Gas Gas 2018 EC250 Six Days - sold
Reply With Quote