View Single Post
  #32  
Old 08-28-2014, 04:20 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

The stock needle is the problem. You've lifted the clip to #2 to clean up the lower to mid, which has left it lean in the mid to 3/4 range. You may find a 178 main helps too (check after you've set the float). But overall, the taper profile of the stock needle doesn't work very well. I'd try an NEDW # 3 based in what you have said.
Reply With Quote