Onespeed,
Didn't forget about you, just been freezing until yesterday afternoon and finally got a chance to wash the bike. Its hard to get a full pic because I would have to stuff my phone in the airbox and shoot from the hip, but this gives you an idea. Its basically some polyethelene about 1mm thick, custom cut and shaped to cover the openings, long enough to be attached to the airbox by pop rivits on each end. Its sealed with black RTV. This shows one side.
Second pic is overall view of under seat after a race and wash. race was not real muddy but under fender was coated good and I am not shy with the hose and brush cleaning things. As you can see, MUCH cleaner with no muddy water running through the gaps.
|