Quote:
Originally Posted by Neil E.
I have the Oxford brand grip heaters on my GG. At first I ran them on DC power, but they would draw the battery down after an hours riding. I then changed them to run on AC power and they work very well with no loss on the normal DC charging. I have a switch for ON/OFF and they work at full output.
|
I can add that my 2015 EC200 has no starter and no battery. I run the heaters on DC, using the headlight supply. The 14V I mentioned, is 14V DC, measured at that point without any load.
__________________
Anders
"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)
2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
|