The spring is behind the piston in the slave cylinder.
The books are crap and may not show it.
I will try and find the part number you will need, because it is not the one in the kit.
If the spring is week it cannot hold the piston agenst the push rod and it gets pushed back by oil pressure. Thats why when you are at idel you have clutch(low oil pressure) and when you build up the revs you have no clutch.
(greater oil pressure)
Some times on cold days the oil is thicker untill the bike warms up and you can have the problem at idel as well.
When you replace the spring its best to replace the o-rings as well.
|