Reg/Rec Help
I've got a '12 300. It originally had an e-start system on it but the original owner took it off to save weight. I'm not a good enough rider for the weight to matter, and I'd like to get it working again. I have all the components except a regulator rectifier. The wiring coming out of my stator is:
White - Goes to nothing. Open spade connection.
Yellow - Goes into a loom and disappears. I assume its supplying power to the headlight itself.
Red, Green, Black/Red, Red/White, All go into the CDI Unit. (a few wires come out of the CDI and go to an alternator regulator.)
Can anyone explain to me what type of Reg/Rec I need. Is there an OEM one? I don't see it anywhere on the parts fiche. (EDIT: Just found Part # EE51200GG-CAB-1 on MattoCycles fiche. for a 2015 Regulator. I'd rather not use it as that would necessitate a wiring harness made for it.)
How would I wire a standard 5wire Reg/Rec? Can I use a standard 5 wire unit?
Please be aware I know almost nothing about electrical. Assume I'm incompetent. I probably am. I'm of the belief that electrons are the devils playground.
__________________
2018 GasGas EnduroGP250
2018 GasGas TXT GP300
1994 Honda CR500 (Ice Racer)
Last edited by CDN Rick; 04-19-2017 at 12:02 PM.
|