ec300 stator?
Hi all, my first post and I've been reading through similar issues here and found lot of good info. Still have some Qs though. I'm sorry I can deal with most mechanical issues but electrical is new and hard for me...
I have 2011 ec300 6days.
Few months ago my lights stopped working (from on/off for a while - sometimes they would still come on when wide open, to completely dead) I thought maybe just broken wire somewhere but didn't really pay much attention to it. Now I have no spark. Went through wires/continuity/grounds everything looks ok. I'm not sure if I trust my multimeter as I've been getting some weird readings (I'll try new one this week, also found some readings posted here) I'm still getting some voltage to cdi and coil when i kick but no spark. I also put coil with wire and spark plug to my ktm to test it and I get spark there. So my guess is a bad stator?
I'm waiting for flywheel puller to look in there... Is there anything else/specific I should be looking for that could cause this (other than stator)? Also it seems hard to find a stator in US. Maybe I'll have better idea when I pull it. But just searching google with part number I'm getting different results. Anyone know what stator to buy (in US)? My wires come out the rear of the cover...Any part numbers?
Thanks!!
|