Cold weather - what to do??
Hey fellas,
I have a 250DE with a 300 top end. I haven't yet looked at what jetting, needle and slide I'm running. I am at about 900 ft above sea level in Wisconsin. I'm going to be ice riding the bike this year, and am contemplating the jetting. But, I have had the bike running in cooler weather, and took a spin today around the yard, sort of putting a bit, but the bike started alright, but took a few kicks. It idled fine, and seemed to run fine once warm (by the way its 25F here today). Should I bother changing the jetting if its running alright and starts? Or do I go ahead and bump the pilot and main up just a hair, and consider one up on the slide?
Just curious - I don't want to burn it up. I usually stay off the ice if it is much below 20 degrees F, but have been out there when it was about 5 - BRRRR!!!!
Any suggestions would be appreciated.
I
|