I have decided to revive this thread.
I have realized that i am currently running my shock with HS comp all the way out (and i think it could come out a bit more for the rocky riding i do)
My plan is to do some changes, but not sure if i am doing enough or too much. I basically want to revalve the comp so that I will have similar HS comp that i have now but will be in the middle of the clickers
thoughts were to change the LS stack to5 and HS stack replace the first 3 HS shims with .20 shims like so:
existing New
(6).20x44 (5).20x44
.15x32 .15x32
.25x44 .20x44
.25x42 .20x42
.25x40 .20x40
.25x38 .25x38
.25x36 .25x36
.25x34 .25x34
.25x32 .25x32
.25x30 .25x30
.25x28 .25x28
.25x26 .25x26
.25x24 .25x24
.25x22 .25x22
.25x20 .25x20
Any comments?
(PS i am too lazy to keep opening up the shock and changing things so only want to do this once, but a bit worried that dropping one of the LS shims may be too much)
__________________
2003 txt250 Pro
2013 Ossa 280i
|