Moved out to Arizona, took a while to get a good jetting setup here.
Bike: 1999 EC200. Original PWK 38 AS-I carb.
Altitude: 2000-3000 feet (Phoenix area - New River, Wildcat, Mile Markers, etc.)
Temperature: 50-90 F. Generally low humidity, even on cooler days.
Main: 172
Pilot: 42
Needle: R1470M, 4th clip
Slide: #7
air screw: 1.5 turns out
Bike pulls clean and crisp off the bottom, though it's a little lean on overrun. I might try a 45 pilot and a little more air screw to clean things up on colder days.
I'm running, pretty consistently, 1 step leaner settings out here than I was at sea level on the east coast. And that goes for every bike in my stable, not just the GG. The dry air and the elevation seem to make a difference.
|