Hi all, I have a 2019 EC, it has 1200 km aprox... Anyways, I noticed the shift shaft had some play, it was not the pedal but the axle itself twisted and allowed the shifter move up and down (the spring only returned the pedal half way).
So I removed the clutch pack and found that bushing n? 18 in the attached diagram was separated from piece 20, allowing piece 20 to move around a little bit instead of pivot over piece 18....
So I installed it again, put everything back toguether and shifter is perfect, Zero play..... After 2 hours riding, free play is back, 18 and 20 must have dettached again.
Anyone has this happen before? I had ordered 18 (wich is a nylon bushing), but i am not sure that will solve it as the original one looked perfect and had no play once is was installed correctly
https://www.motocrosscenter.com/shop...50236041.html#