Loads of threads on kyb conversions here, but not many options for a slot in
I had the 48 sachs forks so just had to machine the top T-clamp bigger by a hair, then a braking adaptor for the 260 disk, used the standard GG wheel and bearings but machined some custom spacers to allow us to use a yz axle. I have a sketch of the spacers somewhere
only issue was the yamaha axle stuck out by about 15mm on the right of the bike, but never got round to shortening it, never hooked on anything
__________________
2003 txt250 Pro
2013 Ossa 280i
|