Quote:
Originally Posted by Mostin3
Folks,
I've got a 2014 ec250 that has had the 2015 e start kit retrofitted to it.
The E-start has never worked properly, it just makes an awful squealing noise but fails to turn over the engine. It appears the bendix is ok and is engaging with the crownwheel
I stripped the bendix down last week and cleaned and oiled it, all teeth are present and are if good condition.
Any ideas?
It may be something as simple as a flat battery or misalignment.
|
As long as it makes a awful noise, I guess the battery is OK. Did you try another battery?
What about the sprag clutch on the crank? Did you check that it engages correctly?
__________________
Anders
"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)
2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
|