First remove the seat from your bike and locate the CDI box. If it is mounted to the fender (instead of in the airbox) you most likely have the dual mapped CDI box. I say most likely as I have never seen the newer style CDI box mounted in the airbox (like the 04 and older bikes) but it probably could have happened.
The most important thing to do is check the end of the CDI box for two short wires (maybe 2 inches long) that are either plugged into each other are just hanging loose.
If you have the dual map CDI box these two leads are the circuit for the Hi-Lo settings. When the circuit is open (unplugged) you are in the Hi setting. When it is closed (plugged in) it is the Lo setting.
These 2 leads (if available) are where you plug your Hi-Lo switch into.
__________________
Steve Berkner
I've attended 21 Six Days as a working Photojournalist
|