Hello again,
Well I had carb off, it was set as Gas Gas standard. Main 175,Idle 42,Needle N1EF 3rd from top.
Checked float height , set at 16mm .
Fuel pipe fell apart when I took it off ! , it appears to me that it's an 8mm pipe.
I have only only 6mm pipe.
I decided to repack the silencer, a fair amount of oily gunge is present around the exit. - it's one of those jobs that you wish you hadn't started!. Anyway got it apart and the rear by the exit is really coked up.
I have ordered some correct size pop rivets and some fuel pipe, I also need chain and sprockets plus a rear tyre.
Now going back to what I said about modern 2 Strokes - I find it interesting that the jetting for the 200 ,250 and 300 is the same , according to the Gas gas owners manual the only difference is the throttle valve/slide on the 200.
So the 200 has the same main jet as the 300! Seems strange to me.
Cheers bill
|